Saturday, February 11, 2017

[Disassembly] Nerf - Mega Bigshock

I finally fixed my camera, and have now been able to do more disassemblies and should have more coming soon.

First up is the Nerf Mega Bigshock. This is one of my favourite Mega blasters mainly due to how simple it is and how comfortable it fits in my hand. It's rather simple to disassemble, but we'll go through it anyway.


First things first, remove all of the screws. There are 7 long screws, and one short screw. The short screw goes into the rear screw hole in the bottom of the grip.





With the screws removed, you can separate the shell halves from the Mega sized Jolt internals.




Remove the 4 screws holding in the plunger tube and you've disassembled the Mega Bigshock.


If you want to try replacing the spring, you would need to remove the silver cap at the top of the plunger head. This can be done with a sharp flat object (a knife works best, but be very careful not to cut yourself). In my experience upgrading the spring doesn't add that much power, and the catch becomes unreliable. Removing the AR doesn't make a huge difference either, and as I personally like to dry-fire my blasters I chose to not remove the AR generally.

1 comment: